Reverse gear detection & Activation of 3rd brake light and reversing light
This set of modules makes it possible to detect and activate a 3rd brake light and an external reversing light.
These modules are self-powered and do not require any external power supply
Maximum output power per output of 250 mA at 12V, i.e. 3W
This set consists of 2 electronic modules:
- Reverse gear detection module
- Reversing light activation module with intermittent sound signal, an additional output is provided for the reversing camera
ATTENTION: This electronic is not compatible with the DNR remote control
© Registered and protected model
The detection module is inserted between the DNR buttons (D - Forward, N - Neutral, R- Reverse) and the cables, this module is housed in the free space under the DNR buttons.
A specific harness inserted between the brake light on the driver's side, allows the resumption of power supplies, the outputs to a 3rd brake light and a reversing light.
The activation module is fixed to the metal structure using two cable ties provided on delivery.
There are no wires to pass between the detection module and the activation module.
The wireless link between the two modules is made by radio frequency
These modules are self-powered by the wiring in place.