DNR remote control with reversing light activation and 3rd brake light for Citröen AMI and Opel Rocks-e

€260.00
No tax Disponible entre 2 à 3 semaines

Touch-sensitive DNR remote control with reversing light activation and 3rd brake light
The AMI's DNR keys are always active with the DNR remote.

This kit includes:
- DNR remote control with reverse gear detection
- DNR remote control receiving module
- Reversing light activation module with intermittent sound signal, additional output for reversing camera

Maximum power available for a reversing light: 2.4W or 200 mA at 12V.

A power interface powered by the 12V service battery enables a third brake light to be activated.

Maximum power available for a third brake light: 12V 2A or 24W.

NB: Color of the remote control closest to the AMI and the Rocks-e

Colour

The DNR remote control reception module is installed in parallel with the DNR buttons, this module is housed in the free space under the DNR buttons.
The DNR remote control is connected to the USB connector on the dashboard.

Just touch the keys with your fingertip to activate them
DNR letters visible at night thanks to red rear lighting

The activation module is fixed to the metal structure using two cable ties provided on delivery.
A specific harness inserted between the brake light on the driver's side, allows the resumption of power supplies, the outputs to a 3rd brake light and a reversing light.

The wireless link between the modules is made by radio frequency.
These modules are self-powered by the wiring in place.
The activation of the reversing light is done thanks to the detection of the reverse gear which is in the remote control, therefore it is inactive on the DNR buttons located to the left of the driver.

RDNRAFDR