Reversing light for Citroën AMI - Opel Rocks-e

Composition of the set:

- reversing light box

- 1 reverse gear detection module

- 1 reversing light activation module

- 60 cm cable for connection

- 6 cable clamps for fixing the cable and the activation module to the structure

- waterproof connector inserted between the driver's side brake light connector

- wire outlet for the rear view camera

Facility :

The 3rd brake light - reversing light is attached to the inside by two adhesives at the bottom of the rear window.

(Be sure to degrease the surface thoroughly before gluing. Adhesives reach their optimal performance after 72 hours; do not place any stress on the part during this period.)

The cable and connectors must be slid behind the interior walls to reach the driver's side brake light.

Afterwards, simply disconnect the brake light connector and insert the cable coming from the 3rd brake light by connecting the connectors provided for this purpose.

The detection module is inserted between the RND buttons (D - Forward, N - Neutral, R- Reverse) and the cables, this module is housed in the free space on the right side under the steering wheel.

The activation module is inserted between the connectors of the stop-position-indicator light, this module is fixed to the metal structure using two cable clamps supplied on delivery.

There are no wires to run between the detection module and the activation module.

The wireless connection between the two modules is achieved by radio frequency

These modules are self-powered by the existing wiring.